WAGNER
WHEEL CYLINDER

WC18010

&

MASTER CYLINDER

MC21680

Wagner 2 (2).JPG (62904 bytes) 

 

THE BLEEDER SCREW HOLE IN THE CAST

IRON WHEEL CYLINDER WAS NOT

MACHINED TO SEAL AGAINST THE

BLEEDER SCREW. THE RESULT IS A LOSS

OF BRAKE FLUID! THIS WAGNER PART

 NUMBER, IS AND POSSIBLY FOR OTHER

 APPLICATIONS, IS A REAR WHEEL

 CYLINDER FOR A 1958 CHEVROLET 3800 1 

TON TRUCK. THE MASTER CYLINDER IS 

UNDER THE FLOOR, MAKING IT DIFFICULT 

TO CHECK THE BRAKE FLUID LEVEL. 

BEWARE

OF WAGNER WC18010 WHEEL CYLINDER.

10 OF THESE HAVE BEEN INSPECTED AND

ALL HAVE FAILED. THERE HAS BEEN A

100% FAILURE RATE RIGHT OUT OF THE

BOX.

 

A NEW WAGNER MASTER CYLINDER MC21860 FOR THE SAME 1958 CHEVROLET 3800 1 TON TRUCK LEAKED FROM THE MAIN CUP SEAL WHENEVER THE BRAKES WERE APPLIED.

 

LETTERS WRITTEN TO WAGNER/ FEDERAL MOGUL WERE NEVER ANSWERED!

 

BEWARE OF THESE WAGNER BRAKE PRODUCTS!